Conclusion first: price per m² is not a single number
A chromium carbide overlay (CCO) plate quote is built from five inputs: overlay thickness, base plate thickness, sheet size, hardness grade and order quantity. Any supplier who quotes a flat price per square meter without fixing these is giving you a comparison trap, not a price. Lock the specification first, then compare.
The five cost drivers
Overlay thickness dominates: a 6 mm hard layer carries far more carbide than a 3 mm layer and costs correspondingly more. Base plate thickness is next. Larger standard sheets reduce waste and handling per m². Higher, uniform hardness (58-65 HRC) and a controlled Cr7C3 fraction around 30% reflect process discipline. Volume and any cutting, rolling or welding preparation complete the list.
Why thickness must be stated
Per-square-meter pricing is meaningless without overlay and base thickness. A thin overlay on a thick base can look cheap per m² yet wear through early; a heavy overlay on a light base may crack under impact. Always quote both thicknesses together with the plate size.
Real specification range
Standard sheets are 1400×3400, 1500×3000 and 2000×3000 mm; overlay thickness runs 2-50 mm, base thickness 4.2-100 mm, hardness 58-65 HRC with roughly 30% Cr7C3. These are the values behind any honest per-square-meter figure.
The comparison trap: cheap plate that fails early
Buyers who chase the lowest price per m² often overlook hardness uniformity and metallurgical bond. Inclusions and porosity between weld passes create early failure points, so a cheaper plate can cost more per hour of operation. Ask for multi-point hardness data and third-party test reports before you sign.
Where CCO plate pays off — and where it does not
CCO plate excels in abrasive sliding wear: chutes, hoppers, mill liners and crusher wear parts. For extreme impact, a tougher base or a different alloy may be safer. Match the plate to the wear mode rather than to the headline price.
Get a quote: what to send us
To receive a real price per square meter, send plate size, required overlay and base thickness, hardness grade, quantity and a short description of the wear conditions (abrasive, impact, temperature). Our engineers will confirm the specification and return a comparable quotation. Composite overlay wear plate, SA overlay plate and hardfaced rollers are built to these values.